Awapow Wireless Vibration Bike Alarm With Remote Control Anti-Theft Door And Window Alarm 110dB Loud Home Bicycle Security System

Note:

1. A separate alarm host needs to be paired with a remote control before it can be used normally. Please refer to the video for the connection method

2. A remote control can be paired with multiple alarm hosts, and an alarm host can also be paired with two remote controls; their pairing method is the same.

3. Both the alarm and remote control can be purchased separately. If you have any needs, please contact customer service

4. If a box contains an alarm host and a remote control, the manufacturer will pair them together. But if there is only one alarm host in a box, then the buyer needs to pair the remote control with this alarm host themselves

5. When the host triggers an alarm for the first time, the alarm sound will sound for 30 seconds before stopping. If the alarm detects continuous vibration, the alarm sound will also continue to sound

Product Features

Wireless vibration alarms with remote by detecting gentle touch, push, or beat (vibration triggered)

Remote control range up to 25M

10 levels adjustable sensitivity

Low-consumption design, which makes it work at least a year

Alarm needs two AAA batteries to operate (not included)

Remote needs a 12V/27A alkaline battery to operate (included)

4 Modes-- Arm/Disarm/Panic/Doorbell mode

Not only a safety/antitheft alarm, but also a doorbell; in doorbell mode, the vibration alarm detects vibration and the host sounds "Dingdong"

Low battery warning

Remote Control 4 Modes

1. Arm key: Press it; once triggered, the alarm will sound 110dB.

2. Disarm key: Press it to stop the arm status or loud voice.

3. SOS key: Press it, and the alarm will sound 110dB even if it is not triggered. This function is very helpful when someone is in danger or needs emergency help.

4. Doorbell key: Press it; once triggered, it will ring "dingdong" to alert you that someone is coming in.

Package Includes

1* Alarm (batteries not included)
1* Remote Control
2* Double-sided stickers
1* User Manual

Matching method between alarm host and remote control

At first, remove the host batteries and reinstall them after 1 minute.

Press the [bell] key within 2 seconds and hold it for about 10 seconds continuously; the host will produce a “Bi…” sound.

This indicates that the host has entered the code learning mode.

Then, release the [bell] key and press [Disarm] or [Arm] again; the host will produce two “Bi...Bi...” sounds, which indicates the code was learned successfully.

This method is applicable to the connection of each alarm and remote control.

When the door is opening or vibrating, it will automatically issue a warning.

To my dear customers:

Thank you very much for your recognition of our products and support for the store.
If you are satisfied with our products or services, please give us a five-star review. Thank you very much!

If you are not satisfied with our products, or you haven't received your package, please contact us first, and we will take responsibility for you and your products. Thanks again!
Have a nice day! ^ - ^