Laminating machine 9 inch laminating machine A4 A3 laminating machine 90 seconds fast preheating hot and cold laminating machine

Faster and Quieter:
Two heated rollers with a quick (90 seconds)

Ultra-low noise, no longer afraid of rumbling noise to disturb family or others. This Laminator will create high quality professional and wrinkle-free results quietly to improve your work efficiency.

ABS Function for Removal: Equipped with ABS Jam Release System, you can draw out the paper easily via the "Jam-Release" button when paper jams, It is very important to ensure the safety of your files and extend the life of the machine. It can laminate 9 inches wide items to meet your needs.

Hot and Cold Dual-Function Laminator: The laminator machine has a hot and cold laminating system to meet different requirements daily. The temperature generated by the heat system roller heats the laminate pouches and then bonds the print to the bag. The cold system is suitable for items sensitive to high temperatures and damaged by heat. Cold laminating needs use with self-adhesive cold seal pouches (not included).

Portable, Suitable for Home/Office/School: Simple operation, compact size, and ultra-light laminator become ideal for individuals, teachers, business white-collar workers, often used to save important documents and precious photos (training materials, legal documents, posters, photos, menus, postcards, bookmarks, tags, children's artwork, etc.)

Important Notice:

👉 Always verify your local voltage before purchasing!

Description:

When using electrical appliances, basic precautions should always be followed to reduce risk of injury or electric shock, including the following:

1. Always unplug the appliance when not in use.

2. This appliance is not intended for use by persons, (including Children), with

reduced physical, sensory or mental capabilities or lack of experience or knowledge. They should be given supervision and instruction in the use of the appliance, by a person responsible for their safety.

3. The laminator will become very hot in use and care should be taken when handling the machine.

4. Protect against the risk of electrical hazards. Do not immerse the power cord, plug or appliance in water or other liquids, or use near water.

5. Do not insert any metal objects or other foreign objects such as jewellery, hair, fingers or clothing into the appliance. 

6. Remove paper clips and staples before laminating.

7. Do not operate the appliance with a damaged plug or power cord or after the appliance has malfunctioned or become damaged in some manner.

8. If the Power Cord is damaged , it  must be replaced by a qualified Engineer in order to avoid a hazard,

9. The appliance should be installed near the outlet socket and the socket should be easily accessible.

10. Only laminate paper or board. Do not laminate unusual objects.

11. Do not use aerosol dusters or cleaners.

12. Do not spray anything into or lubricate the appliance.

Operating the laminator:

The laminator is operated by rocker switch, located at the right hand side of the appliance. 

1. Plug the machine.

2. Switch the machine to "HOT" setting.The red power light will come on.

3. For COLD laminating, select the "COLD" setting, the Green ready  light

will come on straight away and COLD laminating can begin, (please note

you will need special Cold Laminating Pouches).

4. For HOT laminating, select the Hot setting, Hot laminating can begin when the Green "Ready" light comes on (Allow approx  1.5 minutes heat up time).

     If choosing COLD laminating after you have been Hot Laminating the  

     machine must be allowed to cool to room temperature again

5. Prepare the laminating pouch for inserting into the machine. See How to load a laminating pouch below  Do not use pouches thicker than 250mic (2x125mic per side)

6. When the machine has reached operating temperature, you may insert the pouch (sealed edge first) squarely into the machine until it engages with the rollers. Never insert a pouch open edge first into the machine.

7. The pouch will move through the machine and exit at the rear.

8. Turn the laminator to OFF (O) after use.

9. Remove the plug from the power supply.

 IMPORTANT !

 Do not touch the top of the machine during use, as this gets very hot. The   

 Intermittence Operation on this machine is 30mins On and 10mins Off, but we     

 recommend that you allow the machine to cool down for at least 15mins after   

 30mins use. Do not place items on top of the machine at any time.

Laminating capacity:

 The laminator is a personal laminator designed for hot and cold lamination.  

 The minimum laminating thickness is 150 (2x75) microns and the maximum thickness is 250 (2x125) microns..

How to load a laminating pouch:

The laminating pouch is sealed along one side. Open the pouch and place the paper to be laminated centrally inside the pouch as close to the sealed edge as possible. Ensure there is an equal border all round the paper (eg: A4 paper should have a 3mm border). The sealed edge (not the open edges) is placed into the entry slot to start the lamination process.