1Set 990FT Range Dog Wireless Fence Remote Training Collar IPX6 Waterproof Receiver With 0-9 Levels Beep Vibration Shock Mode 4 Channels Rechargeable Transmitter System

*Features*:

• * 3 Training Functions with 0-9 Intensity Levels *: Our dog receiver collar has 3 extremely efficient and safe training modes (beep, vibration, and static shock modes) for you to teach your dog basic obedience commands and correct inappropriate behaviors. The transmitter also features 4 channels to support training 4 dogs simultaneously. In case of accidental injury caused by improper intensity, the receiver collar offers 0-9 levels for beep, vibration, and static shock (Level 0 means off) for you to adjust according to your pet's personality. Please start from the lowest level for better adaptation.
• * Stable Wireless Dog Fence Mode *: Adopts advanced 2.4G frequency technology that consistently provides more stable and accurate signal transmission from 50ft to 990ft compared to others. No complicated manual pairing is required; they pair automatically after power-on, and one transmitter can connect to an unlimited number of receiver collars. When your dog is out of range, the collar will trigger a 5-second sound, 5-second vibration, and 6-second shock; after 2 cycles of this, it emits a "didi" sound until they return to the set distance. After 5 minutes of electric shock, it will enter standby mode.
• * Rechargeable & Long Standby Time *: The built-in 2500mAh rechargeable battery in the transmitter provides 3-5 days of operation after a 3-4 hour full charge. The 500mAh rechargeable collar allows for up to 15 days of standby time (depending on usage frequency) after about 1-2 hours of charging. Comes with a 2-in-1 Type-C charging cable and adapter, which can be conveniently charged via PC, phone charger, laptop, or power bank.
• * IPX6 Waterproof Collar Receiver *: With well-sealed silicone, the training collar features outstanding IPX6 waterproof performance, offering your pets maximum flexibility during outdoor activities. Ensure that the charging port is well-sealed before the dog enters water. Reflective strips on the collar make your dogs clearly visible even at night, effectively keeping your dog safe.
• * Wide Applications *: The collar length can be adjusted from 9.45in to 27.16in to fit most sizes of dogs aged 6 months and older, weighing between 15-120 lbs. The soft woven fabric collar provides a comfortable wearing experience. Smooth contact points with silicone caps rest gently against your pet's skin to deliver correction when needed.

Why does the system not work?

1. The system has entered a self-locking state. You can confirm this issue by looking at the top right corner of the display screen.

1) If you do not operate the unit for 1 minute, it will enter a self-locking state. To operate it again, you must press the "+" and "-" keys simultaneously to unlock it.
2) After 5 minutes of inactivity, the screen will automatically turn off; press any key to wake it up.
3) In the code-pairing state and self-locking state, keys will not function; you must unlock it first. For the code-pairing state, long-press the "CH" key to exit.

2. The collar and system have low battery and need to be charged.

3. The receiver has been fully immersed in water for a long time without the charging port being well sealed. This will cause a malfunction.

How can I know the system is working normally?

To ensure the system operates normally, follow these detailed testing steps after referring to the instruction video and user manual. 

Preparations : Fully charge the transmitter and receiver, then screw in the receiver's metal contact points (do not attach silicone caps).

1. Power On Devices

• Press the  Power Button  on both the receiver and transmitter to turn them on.

2. Prevent Transmitter Self-Locking

• Ensure the transmitter does not enter self-locking mode during the test (refer to the manual for unlocking steps if triggered).

3. Enter Dog Training Mode

• Press the  Mode Button  to switch to  Dog Training Mode .

4. Test Beep/Vibration Function (Pairing Check)

• Press the  Beep/Vibration Button , use the  +/- Buttons  to set the intensity level, then press the  Beep/Vibration Button  again.
• Indicator of Success : If the receiver beeps or vibrates, it confirms successful pairing with the transmitter.

5. Test Shocking Function (with Test Bulb)

• Attach the test bulb to the receiver's metal contact points.
• Press the  Shock Button , adjust the level with  +/- Buttons , then press the  Shock Button  again.
• Indicator of Success : If the test bulb lights up, the shocking function is working properly.

6. Test Wireless Fence Mode (Radius Setting)

• In Dog Training Mode, press the  Mode Button  again to switch to  Wireless Fence Mode .
• Use  +/- Buttons  to set the radius, then place the transmitter in an open area (no obstacles between transmitter and receiver).
• Attach the test bulb to the receiver, carry the receiver, and walk away from the transmitter.
• Indicator of Success : As you walk towards the set radius, the receiver should first beep, then vibrate, and finally shock when crossing the boundary.

Key Notes

• Obstacle-Free Environment : Ensure no objects block the signal between the transmitter and receiver, as this may disrupt communication.
• Test Bulb Requirement : Always use the test bulb when testing the shock function to avoid accidental stimulation.
• Refer to Manual : If issues arise, revisit the user manual and the instruction video.
• Friendly Reminder:
  1. Proper fit of the collar is important! A collar worn for too long or too tight on the pet's neck may cause skin irritation. The receiver collar should fit snugly yet be loose enough to allow one finger between the strap and your pet’s neck.
  2. Please ensure you use the conductive silicone set; this will protect the dog's skin to a certain extent, but it does not affect the electric shock function.
  3. Avoid leaving the collar on the dog for more than 18 hours per day. If possible, reposition the collar on the pet's neck every 1 to 2 hours.
  4. We suggest not using the shock function except in an emergency. When using the shock function, try Level 1 first and gradually increase the level as necessary.
  5. If the collar is too long, please cut off the excessive portion. The edge can easily fray after cutting; use a lighter to melt the cut edge.
  6. If your dog has thick hair on the neck, please use longer contact points.
  7. Use the test bulb to test the electric shock.

Actual Product Photo