Cat 8 Ethernet RJ45 Cable Super Speed 40Gbps Patch LAN Network Gold Plated Lot

Build a wired connection for your desk, entertainment area or network setup with this Cat 8 RJ45 Ethernet cable. Aluminum-foil and braided-metal shielding surround the conductors, while gold-plated contacts and locking connector tabs provide a practical connection to compatible Ethernet equipment.

Key Features

High-Speed Network Capability
The product information lists a maximum data rate of 40Gbps and bandwidth of 2000MHz. Actual connection speeds depend on your network equipment, ports, configuration and internet service; the cable alone does not increase your internet plan's speed.

Double-Shielded Construction
Aluminum-foil shielding and a metal-braided mesh are designed to help reduce interference. The construction diagram identifies oxygen-free copper cores and an LSZH outer jacket.

Gold-Plated RJ45 Contacts
The product information specifies 24K gold-plated RJ45 contacts. Flexible release tabs and molded strain-relief sections make the connectors easier to handle.

Compatible Ethernet Connections
Connect devices with compatible RJ45 Ethernet ports, such as desktop computers, laptops, routers, network switches, network printers, TVs and game consoles. This cable does not connect directly to RJ11 telephone sockets or fiber-optic ports.

Backward Compatibility
The product information lists compatibility with Cat 7, Cat 6a, Cat 6 and Cat 5e network setups. Connection performance remains limited by the capabilities of the connected equipment.

Specifications
Cable category: Cat 8
Connectors: RJ45
Listed maximum data rate: 40Gbps
Listed bandwidth: 2000MHz
Shielding: Aluminum foil and braided metal mesh
Conductor: Oxygen-free copper, as shown in the construction diagram
Outer jacket: LSZH, as labeled in the construction diagram
Contacts: 24K gold-plated, as listed in the product information
Available lengths: 3 ft, 6 ft, 10 ft, 15 ft, 25 ft and 50 ft

How to Use

1. Choose a Suitable Length
Measure the distance between your devices and allow enough slack to route the cable without pulling on either connector.

2. Check the Ports
Confirm that both devices have compatible RJ45 Ethernet ports. Do not insert the cable into a telephone or fiber-optic socket.

3. Connect Your Devices
Align one connector with an Ethernet port on your router or network switch and gently insert it until the locking tab engages. Connect the other end to your computer or other compatible device.

4. Check the Connection
Check your device's network indicator or Ethernet settings. If it does not connect, check that both plugs are fully seated and that the network equipment is powered on and configured correctly.

5. Disconnect Carefully
Press the connector's release tab before removing it. Hold the connector rather than pulling on the cable.

General Care
Avoid sharp bends, crushing and excessive tension.
Keep connectors clean and dry.
Route the cable away from walkways or secure it to reduce trip hazards.
Do not force a connector into a port or continue using a visibly damaged cable.